264x176, Three-color, 2.7inch E-Ink Display HAT For Raspberry/Arduino

264x176, Three-color, 2.7inch E-Ink Display HAT For Raspberry/ArduinoArduino & SCM Supplies<br>Brand: Other<br>Note:<br>This products ship to SPAIN,UNITED KINGDOM and FRANCE only.<br><br>264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interfaceOverviewThis is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supportsred, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingCompatible with Raspberry Pi 2B/3B/Zero/Zero WOnboard 4x KeysSPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 85mm ? 56mmDisplay size: 57.288mm ? 38.192mmDot pitch: 0.217 ? 0.217Resolution: 264 ? 176Display color: red, black, whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: &lt;0.017mWViewing angle: &170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection, low active DCData/Command selection (high for data, low for command) RSTExternal reset, low active BUSYBusy status output, low active<br><br><br>                            GeneralBrandWaveshareModel2.7inch e-Paper HAT (B)Quantity1&nbsp;setForm  Color2.7nch e-Paper Module (B)three-colorMaterialRF4 PCB LCDSpecificationDownload Link   www.waveshare.com/wiki/2.7inch_e-Paper_HAT_(B)    <br>        <br>            <br>                <br>                    <br>                    Dimensions &amp; Weight<br>                <br>            <br>                <br>                    <br>                        <br>                        Dimensions<br>                    <br>                    <br>                        3.35 in x 2.2 in x 0.2 in (8.5 cm x 5.6 cm x 0.5 cm)<br>                    <br>                <br>                            <br>                    <br>                        <br>                        Weight<br>                    <br>                    <br>                        1.27 oz (36 g)<br>                    <br>                <br>        <br>    <br>    <br>        <br>            <br>                <br>                    <br>                    Packing List<br>                <br>            <br>            <br>                <br>                    <br>                    1 x 2.7inch e-Paper HAT (B)1 x RPi screws pack (2pcs)<br>Arduino & SCM Supplies
Brand: Other
Note:
This products ship to SPAIN,UNITED KINGDOM and FRANCE only.

264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interfaceOverviewThis is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supportsred, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingCompatible with Raspberry Pi 2B/3B/Zero/Zero WOnboard 4x KeysSPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 85mm ? 56mmDisplay size: 57.288mm ? 38.192mmDot pitch: 0.217 ? 0.217Resolution: 264 ? 176Display color: red, black, whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: &lt;0.017mWViewing angle: &"170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection, low active DCData/Command selection (high for data, low for command) RSTExternal reset, low active BUSYBusy status output, low active


GeneralBrandWaveshareModel2.7inch e-Paper HAT (B)Quantity1&nbsp;setForm Color2.7nch e-Paper Module (B)three-colorMaterialRF4 PCB LCDSpecificationDownload Link www.waveshare.com/wiki/2.7inch_e-Paper_HAT_(B)




Dimensions &amp; Weight





Dimensions


3.35 in x 2.2 in x 0.2 in (8.5 cm x 5.6 cm x 0.5 cm)





Weight


1.27 oz (36 g)









Packing List





1 x 2.7inch e-Paper HAT (B)1 x RPi screws pack (2pcs)


Подробнее >>>

Светодиодные лампы на Renault Logan 1 поколение Седан (2004-2009)

Светодиодные лампы на Renault Logan 1 поколение Седан (2004-2009)Светодиодные лампы (комплекты)<br>Главное назначение светодиодных ламп – обеспечить высокие характеристики свечения головной габаритной оптики автомобиля. При этом они являются отличной альтернативой галогенных ламп и ксенонового освещения. В о...<br>Светодиодные лампы (комплекты)
Главное назначение светодиодных ламп – обеспечить высокие характеристики свечения головной габаритной оптики автомобиля. При этом они являются отличной альтернативой галогенных ламп и ксенонового освещения. В о...


Подробнее >>>







Джемпер женский Concept Club Bow, цвет: бордовый. 10200310147_1600. Размер 42

Джемпер женский Concept Club Bow, цвет: бордовый. 10200310147_1600. Размер 4210200310147_1600Яркий джемпер из мягкой пушистой пряжи, декорированный шнуровкой из контрастной бархатной ленты. Модель свободного силуэта с круглым вырезом горловины и рукавами 3/4.Яркий джемпер из мягкой пушистой пряжи, декорированный шнуровкой из контрастной бархатной ленты. Модель свободного силуэта с круглым вырезом горловины и рукавами 3/4.

Подробнее >>>